How To Choose The Right Label Adhesive?


Choosing the suitable label adhesive for your product can be challenging. However, a typical permanent adhesive label is essential if you contemplate the intensity of UV light exposure, temperature range, moisture levels, substrate, and the product’s material surface.

Below are some of the tips to consider when choosing the correct label adhesive:

  • The purpose of your label adhesive 
  • The product packaging composition surface of the label.
  • The specific conditions of environmental exposure.
  • The label’s visual appeal.
  • The size of the label you need.
  • The type of end-use surface you will apply it to.
  • The surface expansion and contraction as temperatures fluctuate.
  • The longevity needs. 

Various label adhesives work better for plastic over glass and vice versa. However, if you need to select the custom made adhesives labels, first understand the fundamental label types:


Types of Label Adhesives

The adhesive is tenacious underneath the label. When starting the binding process, pressure is applied on the surface to mobilize the adhesive. Therefore, you have to choose the right adhesive that ascertains the labels to remain stuck throughout the product’s life.

We provide a variety of adhesives to fulfill your requirements, whether removable or tenured.

Label adhesive types prevail in these four primary categories: 


Permanent Adhesive

If you need label fixing assurance that cannot easily distort, then permanent adhesives are suitable for a wide range of applications. If your adhesives fail to work, making it hard to trace key information of your products, try ours, they resist chemical corrosion, abrasion, and UV rays.

You have to choose the right permanent adhesive by contemplating its ability to withstand elements that would wear them out.


Removable Adhesive

If you need labels that can easily be removed, reused later, or shifted, select a label with long-term removability.


Hot Melt Adhesives

Rubber-based adhesives are mainly used for the industrial packaging of frozen food products. However, these pressure-sensitive label adhesives are usually applied at normal room temperature, and when subjected to removal, it will ruin the label and probably the product.

Hot melt adhesives have high initial tack and much softer than acrylic adhesives making them provide excellent adhesion on rough surfaces. However, they have poor resistance to high temperatures and UV light. Therefore, you need to have careful consideration not to use them outside for prolonged periods.

Hot melt adhesives adhere to cold, rough, and moist surfaces with excellent long-term ability to withstand damage through frozen conditions.


Acrylic Adhesives

Acrylic adhesives have excellent UV and heat-resistant properties. The acrylic adhesives have a lower initial tack than the hot melt labels when you apply them on the surface. However, after 24 hours, you will create a strong adhesion.

These adhesives don’t perform well on rough surfaces as they aren’t soft like the hot melt ones. However, with coarse composition, it makes them more helpful for conversion purposes as they have less tendency to flow to label edges.


Wash-Off Adhesives

Suppose you need the ease of relabeling, reusing, and repositioning your labels, then a more effective wash-off adhesive. Then, when you remove the labels, they leave the surface with little or no residue. 

In addition, they have a temporary adhesion of various materials so that when their cycles expire, you can easily remove them. Finally, when some are still valid, they can be recycled and reused to pack other materials.


What Is Adhesive Used for Stickers?

Your label must have a suitable adhesive that enables your stickers to stick permanently. The standard adhesive labels you can use for stickers are rubber, acrylic, or acrylic blend.


What Is Label Adhesive Made Of?

Label adhesives are either rubber or acrylic based: Acrylic are synthetic and are established to stick on wet, rough, or rigid surfaces. Rubber-based adhesives are used for laminations, and they slow down deterioration during storage.



Rubber-made adhesives work well on most surfaces, although they are damaged by UV light and hot temperatures. It makes them less suitable if they end up in an environment from sunlight exposure. Rubber adhesives can easily be removed using solvents.


Acrylic or Acrylic Blends

Acrylic labeled surfaces are less sticky as compared to rubber adhesive. In addition, they are resistant to solvents, making them a better choice for a sticker to last.

Acrylic blends are modified to provide much more adhesion and can be removed much more effortlessly. But, they are prone to damage when exposed to UV and High-temperature levels, just like rubber adhesives.


How Do You Sticker Labels?

There are two primary means you can use when sticking labels, either by hand or machine. However, remember to consider:

  • Using repositionable adhesives, especially when labeling with hands.
  • Cost on the specifics of your project.


Here Are Some Of The Tips To Get Your Job Done Perfectly:

  1. Use a clean and dry surface on your product to apply your label.
  2. Clean the surface, making sure it’s free from moisture.
  3. Wait for your labels to reach room temperature as high or cold temperatures will cause damage.
  4. If the label is thin, firmly and evenly press the label using additional pressure into place.
  5. Leave your label to stick for the time indicated by the manufacturer.


What Are Self-Adhesive Labels?

Self-adhesive labels are pressure-sensitive labels made by printers by constructing three layers, namely:

  • The self-adhesive release liner
  • The layer of the adhesive
  • The adhesive face material


Final Thoughts

We take excellent pride in offering exceptional customer labeling service you won’t easily find anywhere else. Our crew even personally delivers your labels if time is of the essence with zero defects and fast turnaround.

Ready to get started? Contact Us Anytime at our Anchor Graphics website, and we will schedule an appointment for you.

Share on facebook
Share on twitter
Share on linkedin
Share on pinterest

Leave a Reply